≡ ⎆

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision		Previous revision
hardware:eyetracking:eyelink:get_data [2026/09/04 10:09] – created foranhardware:eyetracking:eyelink:get_data [2026/09/04 10:34] (current) – foran
Line 1: Line 1:
 ====== Retrieve EyeLink Data ====== ====== Retrieve EyeLink Data ======
 +EyeLink data (''edf'' files) are collected and stored on the Host PC. Retrieval can be automated by the task code. Use the EyeLink's ''receiveDataFile'' ( [[:hardware:eyetracking:eyelink:task_integration]]) to save eye data alongside other task output autonomously. No intervention needed. 
  
-For most tasks, you should be able to use the built in API to retrieve data and save alongside other task output.+To read these files, see [[:hardware:eyetracking:eyelink:analysis]].
  
-To manually transfer data from the recording saved on the "Host PC"+To manually transfer data from the recording saved on the "Host PC", use the **File Manager** mode of the host PC. And copy ''.edf'' files from the ''elcl/data'' location by either
  
-Use the "File Manager" mode of the host PC. And either+  * browser to http://100.1.1.1/ on the __task__ PC **or** 
 +  * connect USB storage directly to the __host__ PC
  
-  * browser to http://100.1.1.1/ on the task PC or +See {{ :hardware:eyetracking:eyelink:20240903_srresearch-eyelink_el1000plus_usermanual_1.0.21_gop.pdf#page=2|2. EyeLink 1000 Plus Host Software}} and {{ :hardware:eyetracking:eyelink:20240903_srresearch-eyelink_el1000plus_usermanual_1.0.21_gop.pdf#page=30|2.1.4 Running Web UI on a Display Computer other than the Host PC}}
-  * connect USB storage directly to the host PC+
  
 +{{.:pasted:20260904-101635.png}}
 +
 +===== From EPrime (Display) PC =====
 +
 +Transfer files by pointing MS Edge  to http://100.1.1.1/ on the Eprime ("Dispaly") PC.
  
-We transfer files by going to that address on the Eprime ("Dispaly") PC. 
 The EyeLink ("Host") PC must The EyeLink ("Host") PC must
-still be connected with the ethernet cable and +  - still be connected with the ethernet cable and 
-put into "File Manager" mode ("Exit EyeLink" (''Ctrl+Alt+Q'') -> "File Manager").+  - put into "File Manager" mode ("Exit EyeLink" (''Ctrl+Alt+Q'') -> "File Manager"). 
 + 
 +===== From Tracker (Host) PC =====
  
-{{ :hardware:eyetracking:eyelink:20240903_srresearch-eyelink_el1000plus_usermanual_1.0.21_gop.pdf#page=30|"2.1.4 Running Web UI on a Display Computer other than the Host PC" in the manual}}+  - put into "File Manager" mode ("Exit EyeLink" (''Ctrl+Alt+Q'') -> "File Manager"). 
 +  - Copy files, paste into drive